RetroGlow for DS Lite | Install Guide
This kit requires soldering, check out our soldering guide!
For a teardown guide, check out this one from iFixit!
If you're performing the Game Boy Macro mod simply bridge the two points labeled "Macro" with solder and install normally according to this guide.
To begin we will align the pcb with the pads that we will be soldering to. We recommend securing the board down with some kapton tape to prevent movement while soldering.
All the points circled in red will need soldered.
After you have finished soldering, you can hold the battery to the contacts to test, if all works then you can proceed onto reassembly.
Updated 03 Mar 2023
Did this page help you?