FunnyPlaying GBA ITA/IPS Shell Trim Guide
This guide will help you trim your new FunnyPlaying ITA/IPS shell accordingly for the GBA LCD kit you will be placing inside.
It has come to our attention that some shells we were sent are not fully trimmed for the LCD's. Extra trimming may be required for certain variants:

The image below from FunnyPlaying indicates where cuts will need to be made for installing GBA IPS kits with no bracket and for the FunnyPlaying GBA ITA TFT kit:

If you have purchased a GBA IPS LCD kit from HHL and are using either a V2 bracket or V3 bracket, you will need to make cuts on the shell circled below:

After you have made the proper modifications, we suggest using sandpaper to smooth out any cuts made on the shell to avoid any damage to the IPS or ITA kit that will be installed.
If you have any questions, please reach out to support at support@handheldlegend.com

