10min
SNES Retro-C Cable Information
Hand Held Legend earns commissions for Amazon purchases made through links in this post
For modders who are interested in making your own USB-C to SNES cable, here's all the information you'll need. This is not a full guide by any means, but this contains all the information to get you started!
This cable, if wired according to these specifications, will be compatible with RetroSix SNES controllers. See the Connection Table at the bottom to see where each wire must go!
- SNES Extension Cable
Source: igorkromin.net
SNES Pin | USB-C Pin | USB-C Letter Code |
5V | VBUS | A4, B4, A9, B9, VCC, V+ |
Clock | TX1-, TX2- | A3, B3 |
Latch | RX1-, RX2- | A10, B10 |
Data | RX1+, RX2+ | A11, B11 |
GND | GND | A1, B1, A12, B12, GND, G |
Updated 31 Aug 2022
Did this page help you?
Yes
No
Updated 31 Aug 2022
Did this page help you?
Yes
No