website logo
โŒ˜K
Hand Held Legend Wiki
Modding Tips
Restore Your Original Gameboy Bumper Buttons To Factory
IPS Comparison Info
Headphones Working But Speaker Is Not
Power Switch Cleaning Guide
IPS LCD Dry Test
GBA SP | IPS LCD Dry Test
Soldering Iron Guide
HHL Products
GC Pocket Adapter
Open Controller DevKit
Retro-C Cable Information
RetroGlow
ProGCC Mod Kit
T6 Torx Screws
Console Guides
Game Gear
Electrolytic Re-Cap Guide
Nintendo Switch
GameCube
Game Boy (DMG)
Game Boy Pocket
Game Boy Color
Game Boy Advance (AGB)
Game Boy Advance SP
Mod Install Guides
Nintendo Switch
Game Gear
GameCube
Game Boy (DMG)
Game Boy Pocket/Light
Game Boy Color
Game Boy Advance (AGB)
Game Boy Advance SP
Atari Lynx
WonderSwan
Product Usage Guides
Writing A Rom To A Flash Cart
๐Ÿงƒ CleanJuice Modules
Game Boy Color
Troubleshooting
๐Ÿ”‰Audio
IPS Troubleshooting Guide
โšกEZ-Flash Omega Troubleshoot
๐Ÿ”‹ Power Switch Is Too Small
Developer Center
OpenJoyPad HID USB Specification
USB Product IDs Used
Nintendo Switch
Affiliate Guidelines
Docs powered byย archbeeย 
7min

RetroGlow for GBC | User Guide

Product Controls Flowchart

Controls will change depending on which color mode you are currently in. See the control legend and navigation chart below. Navigation through the menus is done by holding Select and pressing Left or Right.

Control Legend

Next Menu - Select & D-Pad Right

Previous Menu - Select & D-Pad Left

Edit Mode Cycle - Select (Press once)

Navigation Controls Chart

๏ปฟ

Mode Controls Chart

๏ปฟ

Color Mode Edit Controls Chart

๏ปฟ

Written Guide

Section 1

You can cycle through several modes in this kit. Navigation through the menus is done by holding Select and pressing Left or Right. You will know youโ€™ve entered a menu when you see the LEDs blink twice. Here are the different menu options with their respective controls, in order:

  1. Default Mode
    1. No other controls
  2. Brightness Mode
    1. Press Left or Right to adjust brightness level
  3. Color Mode Selection
    1. Press Left or Right to change color mode
  4. Color Mode Edit
    1. See section 2 for details
  5. Save All Settings
    1. No other controls. Entering this menu will save all selections and reboot the LED controller

Section 2

In Color Mode Edit, the controls and options will change depending on which color mode you have selected. See the table below for descriptions of each mode and the different customization options available.

  1. User Preset Mode - Pick a unique color for each button or power LED
    1. Press Select once to toggle between BUTTON SELECT, HUE SELECT, and SATURATION SELECT.
    2. In BUTTON SELECT, Press Left or Right to change which button you would like to edit
    3. In HUE SELECT, Press Left or Right to change the hue.
    4. In SATURATION SELECT, Press Left or Right to change the saturation.ย 
  2. Rainbow Color Mode - Fades between all colors and repeats
    1. Press Select once to toggle between SPEED SELECT and SATURATION SELECT.
    2. In SPEED SELECT, Press Left or Right to adjust the fade speed.
    3. In SATURATION SELECT, Press Left or Right to change the saturation.
  3. Fairy Color Mode - Twinkles each button and makes it look magical!
    1. Press Select once to toggle between SPEED SELECT, SATURATION SELECT, and HUE SELECT.
    2. In SPEED SELECT, Press Left or Right to adjust the fade speed.
    3. In SATURATION SELECT, Press Left or Right to change the saturation.
    4. In HUE SELECT, Press Left or Right to change the hue.
  4. Solid Color Mode - Display one color across all LEDs.
    1. Press Select once to toggle between HUE SELECT and SATURATION SELECT.
    2. In HUE SELECT, Press Left or Right to change the hue.
    3. In SATURATION SELECT, Press Left or Right to change the saturation.
  5. To save all settings, Hold Select and press Right.

Updated 03 Mar 2023
Did this page help you?
Yes
No
UP NEXT
RetroGlow for GBC | Install Guide
Docs powered byย archbeeย 
TABLE OF CONTENTS
Product Controls Flowchart
Control Legend
Navigation Controls Chart
Mode Controls Chart
Color Mode Edit Controls Chart
Written Guide
Section 1
Section 2