2min

IPS Ready SP Shell Trim Guide for V2

This trim is necessary in order to fit your LCD and PCB in the top shell housing. The IPS ready shells are pre-cut for IPS kits, however, they were designed for thin FPC cables, as opposed to thicker stiff PCB's. The black PCB included with the V2 and V3 kits will have an extra piece of material around the FPC cables that will not allow for the top shell housing to close completely. Look at the photos in this guide to trim your top shell which will ensure the LCD and PCB are sitting properly and safely in the shell.

Document image
Document image
Board installed
Board installed



Updated 26 Jul 2022
Did this page help you?
Yes
No