website logo
⌘K
Hand Held Legend Wiki
Modding Tips
Restore Your Original Gameboy Bumper Buttons To Factory
IPS Comparison Info
Headphones Working But Speaker Is Not
Power Switch Cleaning Guide
IPS LCD Dry Test
GBA SP | IPS LCD Dry Test
Soldering Iron Guide
HHL Products
GC Pocket Adapter
Open Controller DevKit
Retro-C Cable Information
RetroGlow
ProGCC Mod Kit
T6 Torx Screws
Console Guides
Game Gear
Electrolytic Re-Cap Guide
Nintendo Switch
GameCube
Game Boy (DMG)
Game Boy Pocket
Game Boy Color
Game Boy Advance (AGB)
Game Boy Advance SP
Mod Install Guides
Nintendo Switch
Game Gear
GameCube
Game Boy (DMG)
Game Boy Pocket/Light
Game Boy Color
Game Boy Advance (AGB)
Game Boy Advance SP
Atari Lynx
WonderSwan
Product Usage Guides
Writing A Rom To A Flash Cart
🧃 CleanJuice Modules
Game Boy Color
Troubleshooting
🔉Audio
IPS Troubleshooting Guide
⚡EZ-Flash Omega Troubleshoot
🔋 Power Switch Is Too Small
Developer Center
OpenJoyPad HID USB Specification
USB Product IDs Used
Nintendo Switch
Affiliate Guidelines
Docs powered by archbee 
5min

GBP & GBL Backlight Display Mod | Install Guide

This article is in progress.

Soldering Points

There are two positions you can solder the wires for the backlight kit. This is the same for Game Boy Light. With the Game Boy Light, the original backlight is more easily replaced. The Game Boy Pocket LCD has a reflective layer that needs to be peeled away.

Position 1 (Recommended)



Position 2



Install video courtesy of This Does Note Compute.





Updated 03 Mar 2023
Did this page help you?
Yes
No
UP NEXT
GBP Backlight Display Mod & Voltage Regulator (5V) | Install Guide
Docs powered by archbee 
TABLE OF CONTENTS
Soldering Points
Position 1 (Recommended)
Position 2