GBC HISPEEDIDO V3 IPS | Install Guide
- Test the kit before installation! Once the display is mounted it cannot always be safely removed. We ask that you test the kit by hooking it up before removing the screen protector and before fully mounting the display.
- LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.
- Damage to console or LCD may occur if you do not trim the cartridge port pins. Exercise caution when trimming pins, wear eye protection to protect from pin debris when cutting the metal. Damage caused by these pins are not covered under our return or exchange policy. Trim the pins of your Gameboy's cartridge slot flat so that they don't interfere with any parts of the kit. We also recommend placing some Kapton tape over the trimmed pins to prevent any shorts.
Trim board pins
For this installation you'll want to get the GBC IPS V3 mounting bracket to make mounting the display much easier and more precise. When you've got both the Unbranded GBC IPS V3 kit and the mounting bracket, use this set of instructions to guide how you trim the shell and mount the display.
Note: You'll want to be sure to trim the shell areas to make them as flat as they can be with your flush-cutters.
- If you have any questions or concerns, please reach out to email@example.com
Updated 24 Mar 2023
Did this page help you?