8min
GameCube Retro-C Cable Information
Hand Held Legend earns commissions for Amazon purchases made through links in this post
For modders who are interested in making your own USB-C to GameCube cable, here's all the information you'll need. This is not a full guide by any means, but this contains all the information to get you started!
This cable, if wired according to these specifications, will be compatible with our ProGCC kit, JunkFoodArcade , Frame1, and B0XX controllers.
See the Connection Table at the bottom to see where each wire must go!
Supplies
Diagrams
USB-C Male Header Pinout (Rear Side)
๏ปฟ
USB-C Pinout Full (Connector View)
๏ปฟ
GameCube Male Connector Pinout
๏ปฟ
USB-C to GameCube Pinout Schematic
๏ปฟ
Connection Table
GameCube Pin | USB-C Pin | USB-C Letter Code |
3.3v | TX1+, TX2+ | A2, B2 |
5v | VBUS | A4, B4, A9, B9, VCC, V+ |
Data | RX1+, RX2+ | A11, B11 |
GND | GND | A1, B1, A12, B12, GND, G |
๏ปฟ
