Constant Disconnect Fix - GC Pocket Adapter
3min
Read This First!
Before continuing with this guide, try this troubleshooting step.
- Plug in the PCB to your computer.
- Hold both of the primary buttons on the PCB.
- While holding both buttons, press and release the typically hidden third button.
- Attempt the firmware flashing process
If, at this point, you are still unable to flash the firmware, you may proceed with this guide.
Guide
If you notice that your Pocket Adapter is constantly disconnecting and reconnecting to your PC, there is a DIY repair option that you can use. Some of these chips have come defective from the factory, so we must remove the dead chip in order for the adapter to function correctly.

Simply remove the chip with your hot air machine if you feel that you are up to the task. Alternatively you can reach out to our support email and we will get your situation sorted for you! Email us anytime at support@handheldlegend.com


Updated 23 May 2023
Did this page help you?
Yes
No