CleanScreen LCD Cable Issues
3min
Issue
CleanScreen cable does not have enough lead, is crooked, or is generally not fitting properly for a good connection.
Solution
Due to the 3D printing process, this can leave extra material in the hooks of the brackets. When this extra plastic is there it will cause the cable to be pushed away from the connector. You can simply remove these extra bits of plastic to get the LCD to sit flush with the brackets and get the CleanScreen installed properly.




If you have any questions, please reach out to us at support@handheldlegend.com

Updated 03 Mar 2023
Did this page help you?
Yes
No