AGB V2 TV-Out IPS HISPEEDIDO | Install Guide


  • Test the kit before installation! Once the display is mounted it cannot always be safely removed. We ask that you test the kit by hooking it up before removing the screen protector and before fully mounting the display.
  • LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.

NOTE: Shells will need trimming near the start/select area to ensure proper fit of the PCB Board

Install Guide

Document image
Document image
Document image
Document image

Product Controls

After installation and with your console on and connected to your TV, Press and hold Select+R+L for 5 seconds to activate TV mode.

Updated 21 Jun 2022
Did this page help you?