AGB IPS Cloud Version | Install Guide
This is our install guide for the Game Boy Advance IPS LCD - Cloud Version
- Tweezers
- Y1 Tri-point Screwdriver
- J1 (Japanese Industrial standard) Screwdriver
Ensure that your kit has all the parts included with it. See below:
Game Boy Advance IPS LCD - Cloud Version Includes:
- 1x IPS Backlit Screen
- 1x Control Board
- 2x Ribbon Cables (40 and 32 pin GBA motherboards)
- 2x Acrylic centering squares
- Double sided adhesive
Installing your IPS kit, bending the ribbon cables, soldering, or applying any adhesives in this kit will void the warranty and return policy. Fully test your kit before proceeding.
To assemble your kit, you should first place the alignment brackets into place

Next the screen just sits directly above the two alignment pieces.

From here you can add your buttons, membranes, and connect the ribbon cable to the motherboard.

It is recomended to put a small piece of adhessive or paper in between the touch sensor and the rest of the flex cable, this is to prevent accidental changes if it comes into contact with the flex cable.

If everything is functioning as expected, go ahead and complete the reassembly by replacing the rear screws. See our disassembly guide if you need further assistance here.
- If you have any questions or concerns, please reach out to support@handheldlegend.com

