AGB HISPEEDIDO HDMI Out Kit | Install Guide
This is our install guide for the HISPEEDIDO IPS HDMI Kit - HD TV Output Mod
This kit requires the soldering of two wires for the audio to be passed through the HDMI cable. There are optional brightness control wires as well.
Ensure you have all the parts included with your kit. See below:
HISPEEDIDO IPS HDMI Kit Includes:
- IPS Backlit Screen (NDSi Upper)
- IPS Control Board
- 3M Adhesive
- 2x Ribbon Cables
- 7x Pre-tinned hook up wires
- Micro HDMI to HDMI adapter
This kit requires extensive cutting of the shell in order to make the micro HDMI port accessible from outside of the shell. You will have to cut both halves of the shell, however the back portion will have less cuts. We reccomend using a dremel tool to remove a bulk of the material, and an exacto knife to clean it up.
Everything highlighted in red will need to be cut in order for the display to fit within the shell
Connect the ribbon cable between the console and the main motherboard of the console
This kit requires the soldering of two wires for the audio to be passed through the HDMI port.
There is also the optional step of wiring up brightness control through the buttons.
Ensure that you plug in the second ribbon cable if you are using it to hold the wires down.
Once you have soldered your connections to the board, you can preform one more dry test to ensure that audio is passing through the HDMI port, as well as testing that the buttons function to adjust brightness.
If everything works as intended, then you can finish reassembling your console as normal!