AGB 32 pin HDMI Converter | Install Guide
5min
Whether your using pre cut/modified shells, or original/OEM shells, trimming and cutting the shell is required. This also applies to whether your using an IPS backlight mod or keeping it original.
Shell Trimming and Setup

If you are installing an AGS (GBA SP) display click here.
If you are installing a modern IPS (funnyplaying or unbranded) click here.
Guides for using SP (AGS) Displays


Guide for using modern IPS kit


If everything is functioning as expected, go ahead and complete the reassembly by replacing the rear screws. See our disassembly guide if you need further assistance here.
Troubleshooting
- If you have any questions or concerns, please reach out to support@handheldlegend.com


Updated 24 Mar 2023
Did this page help you?
Yes
No